|
|
Development Boards & Kits - ARM The micro:bit v2 Club Kit is the perfect starting point for STEM clubs coding camps and classrooms. This kit contains ten complete micro:bit v2 Go Bundles providing everything a group needs to get hooked up powered and programming in seconds. I
- KIT-17290
- SparkFun
-
1:
222,48 €
-
7In Stock
|
Mouser Part No
474-KIT-17290
|
SparkFun
|
Development Boards & Kits - ARM The micro:bit v2 Club Kit is the perfect starting point for STEM clubs coding camps and classrooms. This kit contains ten complete micro:bit v2 Go Bundles providing everything a group needs to get hooked up powered and programming in seconds. I
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Air Quality Sensors This is a simple-to-use liquefied petroleum gas (LPG) sensor suitable for measuring LPG (primarily propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations from 200 to 10000 ppm.This sensor has a high sensitivity and fa
- SEN-09405
- SparkFun
-
1:
6,20 €
-
322In Stock
|
Mouser Part No
474-SEN-09405
|
SparkFun
|
Air Quality Sensors This is a simple-to-use liquefied petroleum gas (LPG) sensor suitable for measuring LPG (primarily propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations from 200 to 10000 ppm.This sensor has a high sensitivity and fa
|
|
322In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
- PRT-15363
- SparkFun
-
1:
1,68 €
-
29In Stock
-
70Expected 6/2/2026
|
Mouser Part No
474-PRT-15363
|
SparkFun
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
|
|
29In Stock
70Expected 6/2/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
- ROB-08449
- SparkFun
-
1:
2,57 €
-
70In Stock
|
Mouser Part No
474-ROB-08449
|
SparkFun
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
|
|
70In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09196
- SparkFun
-
1:
10,17 €
-
14In Stock
|
Mouser Part No
474-SEN-09196
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09199
- SparkFun
-
1:
14,01 €
-
3In Stock
|
Mouser Part No
474-SEN-09199
|
SparkFun
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Development Tools RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA a very simple to use RFID reader module from I
- SEN-11862
- SparkFun
-
1:
24,04 €
-
5In Stock
-
67On Order
|
Mouser Part No
474-SEN-11862
|
SparkFun
|
NFC/RFID Development Tools RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA a very simple to use RFID reader module from I
|
|
5In Stock
67On Order
Stock:
5 Can Dispatch Immediately
On Order:
37 Expected 7/2/2026
30 Expected 8/10/2026
Factory Lead Time:
12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
- WRL-15131
- SparkFun
-
1:
32,37 €
-
7In Stock Restricted Availability
|
Mouser Part No
474-WRL-15131
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
- PRT-17546
- SparkFun
-
1:
5,67 €
-
14In Stock
-
45Expected 7/24/2026
|
Mouser Part No
474-PRT-17546
|
SparkFun
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
|
|
14In Stock
45Expected 7/24/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
- ROB-12629
- SparkFun
-
1:
12,00 €
-
29In Stock
|
Mouser Part No
474-ROB-12629
|
SparkFun
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09197
- SparkFun
-
1:
11,14 €
-
4In Stock
-
6Expected 6/8/2026
|
Mouser Part No
474-SEN-09197
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
4In Stock
6Expected 6/8/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
- SEN-09403
- SparkFun
-
1:
7,05 €
-
21In Stock
|
Mouser Part No
474-SEN-09403
|
SparkFun
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
|
|
21In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Pressure Sensor Development Tools Force Sensitive Resistor - Small
- SEN-09673
- SparkFun
-
1:
10,27 €
-
30In Stock
|
Mouser Part No
474-SEN-09673
|
SparkFun
|
Pressure Sensor Development Tools Force Sensitive Resistor - Small
|
|
30In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
- TOL-10865
- SparkFun
-
1:
14,53 €
-
13In Stock
|
Mouser Part No
474-TOL-10865
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
|
|
13In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Keypads Keypad - 12 Button
- COM-14662
- SparkFun
-
1:
4,42 €
-
487In Stock Restricted Availability
|
Mouser Part No
474-COM-14662
|
SparkFun
|
Keypads Keypad - 12 Button
|
|
487In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Raspberry Pi Accessories Raspberry Pi GPIO Male Header - 2x20
- PRT-14275
- SparkFun
-
1:
0,95 €
-
3.697In Stock
|
Mouser Part No
474-PRT-14275
|
SparkFun
|
Raspberry Pi Accessories Raspberry Pi GPIO Male Header - 2x20
|
|
3.697In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Raspberry Pi Accessories Raspberry Pi GPIO Ribbon Cable 40pin6
- CAB-13028
- SparkFun
-
1:
3,44 €
-
138In Stock
|
Mouser Part No
474-CAB-13028
|
SparkFun
|
Raspberry Pi Accessories Raspberry Pi GPIO Ribbon Cable 40pin6
|
|
138In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
- PRT-13054
- SparkFun
-
1:
0,91 €
-
34In Stock
|
Mouser Part No
474-PRT-13054
|
SparkFun
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
|
|
34In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
- PRT-16581
- SparkFun
-
1:
2,02 €
-
96In Stock
|
Mouser Part No
474-PRT-16581
|
SparkFun
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
|
|
96In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10127
- SparkFun
-
1:
3,45 €
-
17In Stock
|
Mouser Part No
474-SEN-10127
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
- SEN-11207
- SparkFun
-
1:
27,05 €
-
5In Stock
|
Mouser Part No
474-SEN-11207
|
SparkFun
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
- TOL-12891
- SparkFun
-
1:
4,73 €
-
11In Stock
|
Mouser Part No
474-TOL-12891
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Keyboards Multimedia Wireless Keyboard
- WIG-14271
- SparkFun
-
1:
27,95 €
-
6In Stock
|
Mouser Part No
474-WIG-14271
|
SparkFun
|
Keyboards Multimedia Wireless Keyboard
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Timers & Support Products This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
- COM-16473
- SparkFun
-
1:
0,95 €
-
538In Stock
|
Mouser Part No
474-COM-16473
|
SparkFun
|
Timers & Support Products This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
|
|
538In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Pressure Sensor Development Tools Flexiforce Pressure Sensor - 100lbs.
- SEN-08685
- SparkFun
-
1:
22,82 €
-
26In Stock
|
Mouser Part No
474-SEN-08685
|
SparkFun
|
Pressure Sensor Development Tools Flexiforce Pressure Sensor - 100lbs.
|
|
26In Stock
|
|
Min.: 1
Mult.: 1
|
|
|