|
|
Educational Kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
- PRT-09353
- SparkFun
-
1:
9,42 €
-
27In Stock
|
Mouser Part No
474-PRT-09353
|
SparkFun
|
Educational Kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
|
|
27In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Current Sensors – Industrial This non-invasive current sensor (also known as a "split core current transformer") can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding t
- SEN-11005
- SparkFun
-
1:
14,89 €
-
2In Stock
|
Mouser Part No
474-SEN-11005
|
SparkFun
|
Current Sensors – Industrial This non-invasive current sensor (also known as a "split core current transformer") can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding t
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po
- SPX-20107
- SparkFun
-
1:
13,36 €
-
3In Stock
|
Mouser Part No
474-SPX-20107
|
SparkFun
|
RF Development Tools Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories LiPo Battery Manager Battery Manager
- PRT-13777
- SparkFun
-
1:
20,32 €
-
216In Stock
|
Mouser Part No
474-PRT-13777
|
SparkFun
|
SparkFun Accessories LiPo Battery Manager Battery Manager
|
|
216In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
- PRT-17368
- SparkFun
-
1:
6,15 €
-
3In Stock
-
5Expected 6/23/2026
|
Mouser Part No
474-PRT-17368
|
SparkFun
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
|
|
3In Stock
5Expected 6/23/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
- PRT-17546
- SparkFun
-
1:
5,67 €
-
3In Stock
-
45Expected 7/24/2026
|
Mouser Part No
474-PRT-17546
|
SparkFun
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
|
|
3In Stock
45Expected 7/24/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
- ROB-12629
- SparkFun
-
1:
12,00 €
-
29In Stock
|
Mouser Part No
474-ROB-12629
|
SparkFun
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09197
- SparkFun
-
1:
11,14 €
-
10In Stock
|
Mouser Part No
474-SEN-09197
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
- SEN-09403
- SparkFun
-
1:
7,05 €
-
21In Stock
|
Mouser Part No
474-SEN-09403
|
SparkFun
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
|
|
21In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
- TOL-10865
- SparkFun
-
1:
14,53 €
-
11In Stock
|
Mouser Part No
474-TOL-10865
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).
- SEN-00246
- SparkFun
-
1:
0,95 €
-
1.282In Stock
|
Mouser Part No
474-SEN-00246
|
SparkFun
|
SparkFun Accessories This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).
|
|
1.282In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th
- SEN-13332
- SparkFun
-
1:
98,58 €
-
14In Stock
|
Mouser Part No
474-SEN-13332
|
SparkFun
|
SparkFun Accessories This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
- BOB-23589
- SparkFun
-
1:
1,96 €
-
20In Stock
|
Mouser Part No
474-BOB-23589
|
SparkFun
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
|
|
20In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Test Clips IC Test Clip SOIC 8-Pin
- COM-13153
- SparkFun
-
1:
41,91 €
-
8In Stock
|
Mouser Part No
474-COM-13153
|
SparkFun
|
Test Clips IC Test Clip SOIC 8-Pin
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
- PRT-09541
- SparkFun
-
1:
1,51 €
-
35In Stock
|
Mouser Part No
474-PRT-09541
|
SparkFun
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
|
|
35In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
- PRT-18015
- SparkFun
-
1:
1,90 €
-
2In Stock
|
Mouser Part No
474-PRT-18015
|
SparkFun
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
- DEV-17273
- SparkFun
-
1:
43,10 €
-
23In Stock
|
Mouser Part No
474-DEV-17273
|
SparkFun
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
|
|
23In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
- PRT-15363
- SparkFun
-
1:
1,68 €
-
97In Stock
|
Mouser Part No
474-PRT-15363
|
SparkFun
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
- ROB-08449
- SparkFun
-
1:
2,57 €
-
144In Stock
|
Mouser Part No
474-ROB-08449
|
SparkFun
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
|
|
144In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09196
- SparkFun
-
1:
10,17 €
-
14In Stock
|
Mouser Part No
474-SEN-09196
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09199
- SparkFun
-
1:
14,01 €
-
3In Stock
|
Mouser Part No
474-SEN-09199
|
SparkFun
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
- WRL-15131
- SparkFun
-
1:
32,37 €
-
7In Stock Restricted Availability
|
Mouser Part No
474-WRL-15131
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Timers & Support Products This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
- COM-16473
- SparkFun
-
1:
0,95 €
-
508In Stock
|
Mouser Part No
474-COM-16473
|
SparkFun
|
Timers & Support Products This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
|
|
508In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Bluetooth Development Tools - 802.15.1 The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano but featuring a lot more powerful processor the nRF52840 from Nordic Semiconductors a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger
- DEV-21252
- SparkFun
-
1:
48,63 €
-
2In Stock
-
1On Order
|
Mouser Part No
474-DEV-21252
|
SparkFun
|
Bluetooth Development Tools - 802.15.1 The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano but featuring a lot more powerful processor the nRF52840 from Nordic Semiconductors a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger
|
|
2In Stock
1On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Pressure Sensor Development Tools Flexiforce Pressure Sensor - 100lbs.
- SEN-08685
- SparkFun
-
1:
22,82 €
-
26In Stock
|
Mouser Part No
474-SEN-08685
|
SparkFun
|
Pressure Sensor Development Tools Flexiforce Pressure Sensor - 100lbs.
|
|
26In Stock
|
|
Min.: 1
Mult.: 1
|
|
|