Texas Instruments TXS0102V/TXS0102V-Q1 2-Bit Voltage Translators

Texas Instruments TXS0102V/TXS0102V-Q1 2-Bit Level Shifting Voltage Translators are bidirectional voltage-level translators and can establish digital switching compatibility between mixed-voltage systems. The device uses two separate configurable power-supply rails. The A ports support operating voltages from 1.65V to 3.6V. It tracks the V_CCA supply and the B ports while supporting operating voltages from 2.3V to 5.5V while it tracks the V_CCB supply. This feature supports higher and lower logic signal levels and provides bidirectional translation capabilities with 1.8V, 2.5V, 3.3V, and 5V voltage nodes.

All I/Os are placed in the high-impedance state when the output-enable (OE) input is low, significantly reducing the power-supply quiescent current consumption. OE should be tied to GND through a pulldown resistor to put the device in the high-impedance state during power up or down. The driver's current sourcing capability determines the minimum value of the resistor. The Texas Instruments TXS0102V-Q1 devices are AEC-Q100 qualified for automotive applications.

Features

No direction-control signal is needed
Maximum data rates
- 24Mbps (push-pull)
- 2Mbps (open-drain)
Available in the Texas Instruments NanoStar™ integrated circuit package
1.65V to 3.6V on A port and 2.3V to 5.5V on B port (V_CCA ≤ V_CCB)
V_CC isolation feature (if either V_CC input is at GND, both ports are in the high-impedance state)
No power-supply sequencing is required (either V_CCA or V_CCB can be ramped first)

I_off supports partial-power-down mode operation
Latch-up performance exceeds 100mA per JESD 78, Class II
ESD protection exceeds JESD 22
- A port
  - 2000V human-body model (A114-B)
  - 500V charged-device model (C101)
- B port
  - 5000V human-body model (A114-B)
  - 500V charged-device model (C101)